wide range of personalized rooftop solutions
Rooftop solar solutions
Basic Flat System
Basic Flat Systems are the simplest solution for rooftop projects.
These PV modules are fastened to the rails by middle-clamps and end-clamps and they are usually placed in portrait configuration, though landscape configuration is also available.
It is also available a broad range of anchoring systems (self-drilling screws, hooks, spikes, etc.) for all kind of rooftops, covers or surfaces.
Basic Flat System ECO
Basic Flat Systems ECO are one of the simplest solution for flat projects.
ECO profile sections are used, placed in the direction of the roof ridge and anchored using self-tapping screws.
Each profile is placed at each junction between PV modules.
It is also available a broad range of anchoring systems (self-drilling screws, hooks, spikes, etc.) for all kind of rooftops, covers or surfaces.
Basic Flat System KR18 ECO
Basic Flat Systems KR-18 ECO Systems are the simplest and most optimized solution for coplanar installations on KR-18 metal sheet rooftops or similar, with either 90º or 180º standing seam profiles.
The PV modules are fastened to these anchoring pieces by middle-clamps and end-clamps and have to be placed with its long side perpendicular to the standing seam profiles.
The design of our slotted anchoring pieces has the advantage that, thanks to its geometry, it adapts perfectly to the standing seam profiles and to the fastening clamps of the PV modules.
Basic Tilt System
Basic Tilt Systems are the simplest solution for tilt projects.
The system uses two slotted rails to support one row of PV modules. These PV modules are fastened to the rails by middle-clamps and end-clamps and can be placed both in portrait and landscape configuration. At the same time, the rails are bolted on aluminum angle brackets with the tilt requested by the client.
It is also available a broad range of anchoring systems (self-drilling screws, hooks, spikes, etc.) for all kind of rooftops, covers or surfaces.
BS Self-Supported
The Self-Supported System is the best choice for flat roofs or roofs with slight slope where it is possible to ballast with concrete blocks, and where the maximum admissible load is limited.
Highly recommended for lightweight rooftops.
BS Bi-oriented
Bi-oriented systems are the ideal solution for PV projects where PV modules need to be oriented east and west for power and productivity requirements.
This system uses shared aluminum supports, at the angle requested by the customer, to hold a row or grid of PV modules. The modules are attached to the profiles using central and lateral fastening components and are mounted horizontally or in landscape orientation.
In turn, these supports are fixed to longitudinal profiles joining adjacent rows, creating matrices or a base grid structure.
